Basic product parameters
Raw Material Feature
As an elastomer, TPU is a kind of material between rubber and plastics. From its rigidity, TPU's rigidity can be measured by elastic modulus. The elastic modulus of rubber is usually between 1 and 10 Mpa, TPU is between 10 and 1000 Mpa, and plastic (nylon, ABS, PC, POM) is between 1000 and 10000 Mpa. TPU has a wide hardness range, ranging from Shore A 60 to Shore D 80 and high elasticity in the whole hardness range; TPU is flexible in a wide temperature range of - 40 to 120 C, without plasticizer; TPU has good resistance to oils (mineral oil, animal and vegetable oils and lubricants) and many solvents; TPU also has good resistance to oil (mineral oil, animal and vegetable oils and lubricants). Good weather resistance, excellent radiation resistance. It is well known that the wear resistance, tear resistance and flexural strength are excellent; high tensile strength, high elongation and low permanent deformation rate of long-term compression are the obvious advantages of TPU.
1. High Hardness range: products with different hardness can be obtained by changing the ratio of reaction components of TPU, and with the increase of hardness, the products still maintain good elasticity, good toughness and wear resistance.
2. High mechanical strength: TPU products have outstanding bearing capacity, impact resistance and shock absorption.
3. Excellent properties of high tension, high tension, strong toughness 、aging resistance and Environmental protection non-toxic.
4. Many outstanding properties, such as high strength, abrasion resistance, cold resistance, oil resistance, water resistance, aging resistance, climate resistance.
Package and Transport
The soft canister made with TPU flexible storage tank Film can hold gas, oil, water, wine, edible oil, soy sauce, all kinds of syrup, industrial oil, diesel oil and other substances. It has the advantages of light weight, foldable, easy to spread and strong environmental adaptability.
Q1: Are you a factory or trading company?
A: We are a factory .
Q2: Where is ur factory?
A: Our factory located in Quanzhou Economic Zone of Fujian. China.
Q3: What payment is accepted ?
A: We accept L/C at sight and T/T(deposit 30% and balance before shipment) and Paypal.
Q4: What's the payment term?
A: (A) T/T in advance. 30% TT deposit before production, 70% balance before delivery.
(B) L/C at sight
(C) Western Union, MoneyGram, PayPal.
Q5: Can you supply sample for us? How many days it will spend?
A: Samples are free if it is less than 1KG, but freight collect. If over 1KG or samples are not their regular sizes, you need to pay sample fees. And we will arrange the samples for you 1 to 3 workdays.