How should the tpu film control the temperature of the hot melt glue stick

Date:May 13, 2019

Pay attention to the use of hot melt glue sticks in daily life. There are some tips to use. When using the tpu film, you should pay attention to the temperature of the tpu film. Because the tpu film is sensitive to temperature, do not exceed five minutes during the preheating period. When the tpu film is almost ablated, you can put the tpu. The film is applied to objects that require stickiness. When using a hot melt glue stick to preheat, you must not use a lighter to heat the tpu film.

The used tpu film should be stored in a cool place to stop storage. If the tpu film is placed too long, it will become very hard. At this time, don't think that the tpu film can't be used, it will be lost. In fact, it can be used. Put the tpu film in warm water for a while, but the temperature of the water can not be overheated, it is suitable, so that it can alleviate the troubles of being too long to be used.

The consumption of tpu film is very simple and convenient. As a kind of composite data, it can be used as an adhesive to stick the object. Pay attention to the temperature and control it slightly. If the temperature is too high or too low, it will affect the application of tpu film. Excessively high may destroy a tpu film preheating machine. If the temperature is too low, there may be no way to make the tpu film ablate, and it will not be used.

Tpu film is widely used in the market today, and it has been used in leather processing and clothing. The tpu film is cheaper and cheaper than other adhesive glues, so many tpu film manufacturers are further consuming. Tpu film, push tpu film to various categories.

Previous: How to properly store TPU film

Next: Introduction of TPU film production process